Champions League

Liverpool’s Champions League return spoiled by Sevilla in dramatic 2-2 draw

Roberto Firmino’s first-half penalty miss proved costly for Jurgen Klopp’s men as Joaquin Correa scored a late equaliser for the Spanish side.

Roberto Firmino’s first-half penalty miss proved costly for Liverpool as Joaquin Correa scored a dramatic equaliser to grab Sevilla a 2-2 Champions League draw on Wednesday.

Anfield was in jubilant mood as the English club welcomed back Champions League football after a two-year absence, but it took Sevilla just four minutes to dampen the enthusiasm.

After Wissam Ben Yedder had given the Spanish side an early lead, goals from Firmino and Mohamed Salah put Liverpool ahead, only for Firmino to miss a penalty.

On the hour, Sevilla manager Eduardo Berizzo was dismissed for throwing the ball away from Liverpool’s Joe Gomez as he tried to take a throw-in, but his disappointment was eased, thanks to Correa, on 72 minutes.

All four sides in Group E are level after the opening round of matches, as Maribor played out a 1-1 draw with Spartak Moscow in Slovenia.

The opening goal was the product of a poor defensive mistake by Dejan Lovren, who completely miskicked while trying to clear a cross from Sergio Escudero at his near post.

Instead of producing a routine clearance, the defender allowed the ball to run across the face of goal where Ben Yedder had the simple task of sliding the ball into an open net.

Following on from the weekend 5-0 thrashing at Manchester City, it was the worst possible start for Jurgen Klopp’s side, although their attacking play was promising.

Emre Can had curled a shot directly at goalkeeper Sergio Rico inside the opening minute and Sadio Mane came closer still as his shot was saved low down by Rico.

Firmino equaliser

Firmino struck the important equaliser after 21 minutes following an incisive attack and a Jordan Henderson pass which sent Alberto Moreno away down the left.

He crossed low into the six-yard box, where Firmino lunged ahead of Gabriel Mercado to turn in the equaliser.

Minutes later, the Reds should have been in front after a blistering counter-attack ended with Mane playing Can clean through on goal only for the German international to roll his shot inches beyond the post.

But after 37 minutes, Klopp’s side did take a grip of the contest when Salah shot them ahead in fortunate circumstances.

The Egyptian winger’s attack into the Sevilla area broke down, but he showed great persistence to win the ball back from Steven N’Zonzi.

Salah’s firm, first-time shot from over 20 yards took an unkind deflection off defender Simon Kjaer and looped over goalkeeper Rico and in.

Before the interval, the tie should have been over when defender Guido Pizarro appeared to handle, before hauling down Mane inside the Sevilla area.

Firmino strode up to take the penalty but, having sent Rico the wrong way, saw his effort rebound to safety off the right-hand post.

Liverpool continued to press the visitors after the restart and, after Berizzo’s dismissal, a Georginio Wijnaldum shot was well saved by the unsighted Rico through a crowded penalty area.

Great to be back in the champions league..... more to come from us. 💪🏻 #YNWA

A post shared by Jordan Henderson (@jhenderson) on

Sevilla levelled when substitute Luis Muriel was given far too much space in midfield and his through ball was met by Correa, who lifted a superb finish over Loris Karius.

Klopp brought on substitute Philippe Coutinho for the final 15 minutes, his first game for the club since failing to engineer a move to Barcelona, but the Brazilian made little impact.

“Philippe trained the last few days really, really well,” said Klopp. “Maybe tonight in one or two situations he was not lucky but that was him without rhythm.

“It helped him that he could play tonight in the long-term, that’s for sure.”

Muriel might have won the game as he got the better of Gomez and rolled a shot just wide, and the Liverpool youngster compounded his error seconds later with a second yellow card and subsequent dismissal.

We welcome your comments at letters@scroll.in.
Sponsored Content BY 

Making two-wheelers less polluting to combat air pollution in India

Innovations focusing on two-wheelers can make a difference in facing the challenges brought about by climate change.

Two-wheelers are the lifeline of urban Asia, where they account for more than half of the vehicles owned in some countries. This trend is amply evident in India, where sales in the sub-category of mopeds alone rose 23% in 2016-17. In fact, one survey estimates that today one in every three Indian households owns a two-wheeler.

What explains the enduring popularity of two-wheelers? In one of the fastest growing economies in the world, two-wheeler ownership is a practical aspiration in small towns and rural areas, and a tactic to deal with choked roads in the bigger cities. Two-wheelers have also allowed more women to commute independently with the advent of gearless scooters and mopeds. Together, these factors have led to phenomenal growth in overall two-wheeler sales, which rose by 27.5% in the past five years, according to the Society of Indian Automobile Manufacturers (SIAM). Indeed, the ICE 2016 360 survey says that two-wheelers are used by 37% of metropolitan commuters to reach work, and are owned by half the households in India’s bigger cities and developed rural areas.

Amid this exponential growth, experts have cautioned about two-wheelers’ role in compounding the impact of pollution. Largely ignored in measures to control vehicular pollution, experts say two-wheelers too need to be brought in the ambit of pollution control as they contribute across most factors determining vehicular pollution - engine technology, total number of vehicles, structure and age of vehicles and fuel quality. In fact, in major Indian cities, two-thirds of pollution load is due to two-wheelers. They give out 30% of the particulate matter load, 10 percentage points more than the contribution from cars. Additionally, 75% - 80% of the two-wheelers on the roads in some of the Asian cities have two-stroke engines which are more polluting.

The Bharat Stage (BS) emissions standards are set by the Indian government to regulate pollutants emitted by vehicles fitted with combustion engines. In April 2017, India’s ban of BS III certified vehicles in favour of the higher BS IV emission standards came into effect. By April 2020, India aims to leapfrog to the BS VI standards, being a signatory to Conference of Parties protocol on combating climate change. Over and above the BS VI norms target, the energy department has shown a clear commitment to move to an electric-only future for automobiles by 2030 with the announcement of the FAME scheme (Faster Adoption and Manufacturing of Hybrid and Electric Vehicles in India).

The struggles of on-ground execution, though, remain herculean for automakers who are scrambling to upgrade engine technology in time to meet the deadlines for the next BS norms update. As compliance with BS VI would require changes in the engine system itself, it is being seen as one of the most mammoth R&D projects undertaken by the Indian automotive industry in recent times. Relative to BS IV, BS VI norms mandate a reduction of particulate matter by 82% and of oxides of nitrogen (NOx) by 68%.

Emission control in fuel based two-wheelers can be tackled on several fronts. Amongst post-emission solutions, catalytic converters are highly effective. Catalytic converters transform exhaust emissions into less harmful compounds. They can be especially effective in removing hydrocarbons, nitrous oxides and carbon monoxide from the exhaust.

At the engine level itself, engine oil additives are helpful in reducing emissions. Anti-wear additives, friction modifiers, high performance fuel additives and more lead to better performance, improved combustion and a longer engine life. The improvement in the engine’s efficiency as a result directly correlates to lesser emissions over time. Fuel economy of a vehicle is yet another factor that helps determine emissions. It can be optimised by light weighting, which lessens fuel consumption itself. Light weighting a vehicle by 10 pounds can result in a 10-15-pound reduction of carbon dioxide emissions each year. Polymer systems that can bear a lot of stress have emerged as reliable replacements for metals in automotive construction.

BASF, the pioneer of the first catalytic converter for automobiles, has been at the forefront of developing technology to help automakers comply with advancing emission norms while retaining vehicle performance and cost-efficiency. Its new state-of-the-art manufacturing facility at Mahindra World City near Chennai is equipped to develop a range of catalysts for diverse requirements, from high performance and recreational bikes to economy-oriented basic transportation. BASF also leverages its additives expertise to provide compounded lubricant solutions, such as antioxidants, anti-wear additives and corrosion inhibitors and more. At the manufacturing level, BASF’s R&D in engineered material systems has led to the development of innovative materials that are much lighter than metals, yet just as durable and strong. These can be used to manufacture mirror brackets, intake pipes, step holders, clutch covers, etc.

With innovative solutions on all fronts of automobile production, BASF has been successfully collaborating with various companies in making their vehicles emission compliant in the most cost-effective way. You can read more about BASF’s innovations in two-wheeler emission control here, lubricant solutions here and light weighting solutions here.

This article was produced by the Scroll marketing team on behalf of BASF and not by the Scroll editorial team.