Indian Tennis

Davis Cup: Bopanna and Raja lose doubles rubber in a setback to India’s World Group chances

Canada’s Daniel Nestor and Vasek Pospisi won 7-5, 7-5, 5-7, 6-2 giving their team a 2-1 lead in the Play-off tie at Edmonton.

India’s chances of qualifying for the World Group suffered a setback when Rohan Bopanna and Purav Raja lost the doubles rubber to Canada’s Daniel Nestor and Vasek Pospisil on Saturday. The Canadians won 7-5, 7-5, 5-7, 6-3 in two hours and 52 minutes, giving their team a 2-1 lead in the Davis Cup Play-off tie at Edmonton.

Pospisil, 27, was the youngest on court and the only one who plays the singles as well on the Tour. He made a huge difference to the outcome with his returns from near the baseline and perfect placements at the net. He was not nominated for the singles by his captain due to his rough patch, but he troubled both the Indians consistently and carried the home team on his shoulders as 45-year-old Nestor came under pressure several times.

Raja, who has made good progress on the circuit along with Divij Sharan, was superb at the net with his deft volley winners but limitations with his serve and baseline strokes hurt India. Drafted into the side in the last minute, Raja dropped his serve five times in the match – twice while serving under pressure at 5-6 in the first two sets.

Bopanna’s big serving game was also missing as he served five double faults in team’s total of 12. His single- handed backhand winners were nowhere to be seen.

The second set began with a rare four straight breaks of serve before Pospisil held in the fifth. But the match was briefly overshadowed by a controversial point in the second game when Raja, standing very close to the net, was found guilty of playing the ball before it crossed the net and the chair umpire gave the point to the Canadians.

A furious Indian captain Mahesh Bhupathi argued with the umpire along with Bopanna but the umpire did not budge and the referee asked the players to continue the game and it ended up with Bopanna losing the serve.

There was chance for the Indians to get another break Nestor’s serve but could not utilise any of the three chances in the seventh game. Raja yet again came out to serve at 5-6 and again dropped serve to hand the Canadians a two-set lead.

The third set was on even keel at 3-3 when Nestor dropped serve to hand India a mini-lead. It was Bopanna’s return winner which gave the Indians breakpoint which was converted as the left-hander served a double fault.

However, the Indians could not consolidate the lead with Raja yet again dropping serve with a double fault at 30-40. India stared at defeat in the 10th on Bopanna’s serve but he held his nerves with an ace.

In a sudden change of momentum, Nestor found himself down 0-40 in the next game and lost serve to allow Raja to serve out the third set in the 12th. The Canadians regrouped quickly, broke Raja in the fourth and pulled away with a comfortable 4-1 lead. Pospisil sealed the match for his side when Bopanna’s awkwardly-picked return from close to body, went wide.

India now needs to win both its reverse singles rubbers on Sunday in order to reach the World Group, where Yuki Bhambri will play Brayden Schnur and Ramkumar Ramanathan will take on Denis Shapovalov.

We welcome your comments at letters@scroll.in.
Sponsored Content BY 

Making two-wheelers less polluting to combat air pollution in India

Innovations focusing on two-wheelers can make a difference in facing the challenges brought about by climate change.

Two-wheelers are the lifeline of urban Asia, where they account for more than half of the vehicles owned in some countries. This trend is amply evident in India, where sales in the sub-category of mopeds alone rose 23% in 2016-17. In fact, one survey estimates that today one in every three Indian households owns a two-wheeler.

What explains the enduring popularity of two-wheelers? In one of the fastest growing economies in the world, two-wheeler ownership is a practical aspiration in small towns and rural areas, and a tactic to deal with choked roads in the bigger cities. Two-wheelers have also allowed more women to commute independently with the advent of gearless scooters and mopeds. Together, these factors have led to phenomenal growth in overall two-wheeler sales, which rose by 27.5% in the past five years, according to the Society of Indian Automobile Manufacturers (SIAM). Indeed, the ICE 2016 360 survey says that two-wheelers are used by 37% of metropolitan commuters to reach work, and are owned by half the households in India’s bigger cities and developed rural areas.

Amid this exponential growth, experts have cautioned about two-wheelers’ role in compounding the impact of pollution. Largely ignored in measures to control vehicular pollution, experts say two-wheelers too need to be brought in the ambit of pollution control as they contribute across most factors determining vehicular pollution - engine technology, total number of vehicles, structure and age of vehicles and fuel quality. In fact, in major Indian cities, two-thirds of pollution load is due to two-wheelers. They give out 30% of the particulate matter load, 10 percentage points more than the contribution from cars. Additionally, 75% - 80% of the two-wheelers on the roads in some of the Asian cities have two-stroke engines which are more polluting.

The Bharat Stage (BS) emissions standards are set by the Indian government to regulate pollutants emitted by vehicles fitted with combustion engines. In April 2017, India’s ban of BS III certified vehicles in favour of the higher BS IV emission standards came into effect. By April 2020, India aims to leapfrog to the BS VI standards, being a signatory to Conference of Parties protocol on combating climate change. Over and above the BS VI norms target, the energy department has shown a clear commitment to move to an electric-only future for automobiles by 2030 with the announcement of the FAME scheme (Faster Adoption and Manufacturing of Hybrid and Electric Vehicles in India).

The struggles of on-ground execution, though, remain herculean for automakers who are scrambling to upgrade engine technology in time to meet the deadlines for the next BS norms update. As compliance with BS VI would require changes in the engine system itself, it is being seen as one of the most mammoth R&D projects undertaken by the Indian automotive industry in recent times. Relative to BS IV, BS VI norms mandate a reduction of particulate matter by 82% and of oxides of nitrogen (NOx) by 68%.

Emission control in fuel based two-wheelers can be tackled on several fronts. Amongst post-emission solutions, catalytic converters are highly effective. Catalytic converters transform exhaust emissions into less harmful compounds. They can be especially effective in removing hydrocarbons, nitrous oxides and carbon monoxide from the exhaust.

At the engine level itself, engine oil additives are helpful in reducing emissions. Anti-wear additives, friction modifiers, high performance fuel additives and more lead to better performance, improved combustion and a longer engine life. The improvement in the engine’s efficiency as a result directly correlates to lesser emissions over time. Fuel economy of a vehicle is yet another factor that helps determine emissions. It can be optimised by light weighting, which lessens fuel consumption itself. Light weighting a vehicle by 10 pounds can result in a 10-15-pound reduction of carbon dioxide emissions each year. Polymer systems that can bear a lot of stress have emerged as reliable replacements for metals in automotive construction.

BASF, the pioneer of the first catalytic converter for automobiles, has been at the forefront of developing technology to help automakers comply with advancing emission norms while retaining vehicle performance and cost-efficiency. Its new state-of-the-art manufacturing facility at Mahindra World City near Chennai is equipped to develop a range of catalysts for diverse requirements, from high performance and recreational bikes to economy-oriented basic transportation. BASF also leverages its additives expertise to provide compounded lubricant solutions, such as antioxidants, anti-wear additives and corrosion inhibitors and more. At the manufacturing level, BASF’s R&D in engineered material systems has led to the development of innovative materials that are much lighter than metals, yet just as durable and strong. These can be used to manufacture mirror brackets, intake pipes, step holders, clutch covers, etc.

With innovative solutions on all fronts of automobile production, BASF has been successfully collaborating with various companies in making their vehicles emission compliant in the most cost-effective way. You can read more about BASF’s innovations in two-wheeler emission control here, lubricant solutions here and light weighting solutions here.

This article was produced by the Scroll marketing team on behalf of BASF and not by the Scroll editorial team.