The latest in the BCCI’s crackdown on conflict of interest within Indian cricket might force commentators contracted with the Indian board to choose between commentary and writing sponsored columns for newspapers.
According to a report in The Times of India, the BCCI’s Committee of Administrators has decided to check the contracts of commentators to check for possible conflict.
The COA, in its meeting on October 24, has decided that “the contracts between the BCCI and its commentators should be examined to see if they permitted BCCI commentators to 1) write sponsored columns for newspapers, and or 2) participate in sponsored awards/rating programmes,” continued the report.
Among the big names that could be affected by this are Sunil Gavaskar, Sanjay Manjrekar and Murali Kartik, and Harsha Bhogle. Along with commentary, Gavaskar is a cricket expert on a news channel, while Bhogle is involved with a cricket website as well.
“As per the Lodha Committee guidelines on conflict of interest, those employed with the BCCI can’t have another source of income,” the report quoted a BCCI official as saying. “We’ve become very strict with conflict of interest issues – recently, a physiotherapist with the Indian women’s team had to quit her job because her brother is an official with a state association.
“The COA will have a look at their contracts, but the final call on this issue will be taken by a Supreme Court-appointed ombudsman, as and when he’s appointed by the apex court,” the official added.
However, this rule won’t apply to the Hindi commentators, since their contract is with Star Sports and not BCCI, as per the report.
Back in August, it was reported that Gavaskar and others enlisted in the BCCI’s panel of commentators had sign an undertaking that they don’t have any conflict of interest as per the recommendations by the Lodha panel.
COA member Diana Edulji had said that all the issues pertaining to conflict of interest are being looked into. “We have discussed the names but it has not been finalised. We need to look into the Conflict of Interest rules properly. We still don’t know who has what interest,” she had said.
Making two-wheelers less polluting to combat air pollution in India
Innovations focusing on two-wheelers can make a difference in facing the challenges brought about by climate change.
Two-wheelers are the lifeline of urban Asia, where they account for more than half of the vehicles owned in some countries. This trend is amply evident in India, where sales in the sub-category of mopeds alone rose 23% in 2016-17. In fact, one survey estimates that today one in every three Indian households owns a two-wheeler.
What explains the enduring popularity of two-wheelers? In one of the fastest growing economies in the world, two-wheeler ownership is a practical aspiration in small towns and rural areas, and a tactic to deal with choked roads in the bigger cities. Two-wheelers have also allowed more women to commute independently with the advent of gearless scooters and mopeds. Together, these factors have led to phenomenal growth in overall two-wheeler sales, which rose by 27.5% in the past five years, according to the Society of Indian Automobile Manufacturers (SIAM). Indeed, the ICE 2016 360 survey says that two-wheelers are used by 37% of metropolitan commuters to reach work, and are owned by half the households in India’s bigger cities and developed rural areas.
Amid this exponential growth, experts have cautioned about two-wheelers’ role in compounding the impact of pollution. Largely ignored in measures to control vehicular pollution, experts say two-wheelers too need to be brought in the ambit of pollution control as they contribute across most factors determining vehicular pollution - engine technology, total number of vehicles, structure and age of vehicles and fuel quality. In fact, in major Indian cities, two-thirds of pollution load is due to two-wheelers. They give out 30% of the particulate matter load, 10 percentage points more than the contribution from cars. Additionally, 75% - 80% of the two-wheelers on the roads in some of the Asian cities have two-stroke engines which are more polluting.
The Bharat Stage (BS) emissions standards are set by the Indian government to regulate pollutants emitted by vehicles fitted with combustion engines. In April 2017, India’s ban of BS III certified vehicles in favour of the higher BS IV emission standards came into effect. By April 2020, India aims to leapfrog to the BS VI standards, being a signatory to Conference of Parties protocol on combating climate change. Over and above the BS VI norms target, the energy department has shown a clear commitment to move to an electric-only future for automobiles by 2030 with the announcement of the FAME scheme (Faster Adoption and Manufacturing of Hybrid and Electric Vehicles in India).
The struggles of on-ground execution, though, remain herculean for automakers who are scrambling to upgrade engine technology in time to meet the deadlines for the next BS norms update. As compliance with BS VI would require changes in the engine system itself, it is being seen as one of the most mammoth R&D projects undertaken by the Indian automotive industry in recent times. Relative to BS IV, BS VI norms mandate a reduction of particulate matter by 82% and of oxides of nitrogen (NOx) by 68%.
Emission control in fuel based two-wheelers can be tackled on several fronts. Amongst post-emission solutions, catalytic converters are highly effective. Catalytic converters transform exhaust emissions into less harmful compounds. They can be especially effective in removing hydrocarbons, nitrous oxides and carbon monoxide from the exhaust.
At the engine level itself, engine oil additives are helpful in reducing emissions. Anti-wear additives, friction modifiers, high performance fuel additives and more lead to better performance, improved combustion and a longer engine life. The improvement in the engine’s efficiency as a result directly correlates to lesser emissions over time. Fuel economy of a vehicle is yet another factor that helps determine emissions. It can be optimised by light weighting, which lessens fuel consumption itself. Light weighting a vehicle by 10 pounds can result in a 10-15-pound reduction of carbon dioxide emissions each year. Polymer systems that can bear a lot of stress have emerged as reliable replacements for metals in automotive construction.
BASF, the pioneer of the first catalytic converter for automobiles, has been at the forefront of developing technology to help automakers comply with advancing emission norms while retaining vehicle performance and cost-efficiency. Its new state-of-the-art manufacturing facility at Mahindra World City near Chennai is equipped to develop a range of catalysts for diverse requirements, from high performance and recreational bikes to economy-oriented basic transportation. BASF also leverages its additives expertise to provide compounded lubricant solutions, such as antioxidants, anti-wear additives and corrosion inhibitors and more. At the manufacturing level, BASF’s R&D in engineered material systems has led to the development of innovative materials that are much lighter than metals, yet just as durable and strong. These can be used to manufacture mirror brackets, intake pipes, step holders, clutch covers, etc.
With innovative solutions on all fronts of automobile production, BASF has been successfully collaborating with various companies in making their vehicles emission compliant in the most cost-effective way. You can read more about BASF’s innovations in two-wheeler emission control here, lubricant solutions here and light weighting solutions here.
This article was produced by the Scroll marketing team on behalf of BASF and not by the Scroll editorial team.